Welcome Guest! To enable all features please Login. New Registrations are disabled.

Notification

Icon
Error
HIKIVISION DS-2CD2012-I is in the hardware list but not connecting - Unable to connect to HIKVISION camera
Options Go to last post Go to first unread
Previous Topic Next Topic
Suresh
#1 Posted : Sunday, May 4, 2014 5:44:26 PM(UTC)
Suresh



Joined: 5/4/2014(UTC)
Posts: 2
Hi, I am using windows 7 64 bit and installed XPROTECT GO 2013. I did an auto setup giving the IP and PORT and the dll came as "PSIA CONFIRMED DEVICE".

However when I navigate to SURVEILLANCE SERVER -> ADVANCED CONFIGURATION -> CAMERA AND STORAGE INFORMATION and click on camera 1 I get "Connection error on "Camera 1""!

My camera is fully operational using HIKVISION WEB INTERFACE and hence the IP and PORT is working!

Can somebody help me troubleshoot this one?
Back to top
Bo
#2 Posted : Monday, May 5, 2014 4:35:23 PM(UTC)
Bo



Joined: 8/30/2012(UTC)
Posts: 1,115

Thanks: 35 times
Was thanked: 317 time(s) in 298 post(s)
This HikVision should have a dedicated dedicated driver, and I would guess it would work better. Try to remove the camera and then add is this time try to pick the HikVision8x3 driver instead of using auto-detect.

If I had not been able to spot that you most likely have the wrong driver I would have directed you to this very general knowledge base article.. http://www.milestonesys....base/?articleNo=00000169

Yours Sincerely, Bo Andersen
Back to top
Suresh
#3 Posted : Tuesday, May 6, 2014 4:30:44 AM(UTC)
Suresh



Joined: 5/4/2014(UTC)
Posts: 2
Tried that as well... no luck

Tried

1. Manually enter IP ADDRESS
2. Entered the ip and port + user / pswd + selected HIKVISION8X3

Get message:

Unable to connect!

The PORT / USERNAME AND PASSWORD is correct - the web interface of hikvision works flawlessly with these parameters

Edited by user Tuesday, May 6, 2014 4:33:02 AM(UTC)  | Reason: Not specified

Suresh attached the following image(s):
mstone.jpg (61kb) downloaded 14 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
Eddie
#4 Posted : Tuesday, May 6, 2014 11:04:10 AM(UTC)
Eddie



Joined: 4/16/2012(UTC)
Posts: 66

Thanks: 2 times
Was thanked: 16 time(s) in 16 post(s)
can you check the below -

  • Check the firmware on the camerais the tested - 5.0.0 build 130412
    • No firewall and AV enabled on the server (if enabled - create exception for the Hikvision camera and ports 80 and 554)


This device has been supported since device pack 6.9 - please check the device pack installed on your system
Back to top
Andrew
#5 Posted : Tuesday, December 23, 2014 3:34:16 AM(UTC)
Andrew



Joined: 9/25/2013(UTC)
Posts: 8

Thanks: 4 times
Was thanked: 2 time(s) in 2 post(s)
Here is how I set up my Hikivision and similar camera.

Add hardware manually, enter static IP, Port, username, password, universal 1 ch driver.

Once the device is connected, see attached picture for final device options to configure for live stream.
Andrew attached the following image(s):
mstone hikvsn.PNG (150kb) downloaded 1 time(s).

You cannot view/download attachments. Try to login or register.
Back to top
 1 user thanked Andrew for this useful post.
Justin on 12/23/2014(UTC)
EG Retail
#6 Posted : Thursday, January 15, 2015 7:47:48 PM(UTC)
EG Retail



Joined: 7/6/2012(UTC)
Posts: 1
Try using "video519"
Back to top
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2018, Yet Another Forum.NET